There is nothing as unappealing as damaged paint on the front bonnet. If you just got a new car or got a new paint job done, and want to keep it looking fresh and safe, then there’s a simple way to go about it: paint protection films.
Keeping the paint safe from chips and road damage, this small addition to your vehicle will make sure your vehicle looks just as good as you want it to!
- Best Paint Protection Film Choices
- Comparison Table of Top 10 Paint Protection Film
- Our 10 Picks of The Best Paint Protection Film
- 1. VViViD 3M Clear Vinyl Paint Protection Film
- 2. Trimbrite BodyGuard Clear Smooth Protection Film
- 3. 3M Scotchgard Clear Paint Protection Bulk Film Roll
- 4. Install Proz Self-Healing Clear Paint Protection Film Kits
- 5. XPEL Black Universal Door Sill Guard Paint Protection Film Kit
- 6. 3M PAK M3000 Hand-Masker Pre-Assembled Masking Film Kit
- 7. Mkbrother Uncut Roll Window Tint Film
- 8. JDMBESTBOY 4PCs 3M Scotchguard Protective Guard Film
- 9. VViViD 3M Clear Paint Protection Vinyl Film
- 10. PrintsnPlots – 3M Pro Series Paint Protection Film
- Things to consider when buying paint protection film
- Frequently Asked Questions (FAQs)
- Final Thoughts
Best Paint Protection Film Choices
Since there is so much variety in the market these days, settling on the most reliable pick isn’t that easy to do. Luckily, you have me.
I went out on a limb and compiled a brief list of the best paint protection films currently available in 2020. To get you started right off the bat, here’s a comparison table I’ve made
Comparison Table of Top 10 Paint Protection Film
Our 10 Picks of The Best Paint Protection Film
I have briefly reviewed all the models that I’ve highlighted in the comparison table above. To make things easier and as a summarizing note, I’ve also highlighted a few pros and cons that will make it easier for you to settle on a model.
Without further ado, here are the top 10 picks of the best paint protection films of 2020!
1. VViViD 3M Clear Vinyl Paint Protection Film
I’d like to start off this list with my premium recommendation, the VViViD 3M Clear Vinyl Paint Protection Film. Here’s why it’s on the top!
First things first, the VViViD 3M Clear Vinyl Paint Protection Film is easy to use and apply. The installation isn’t that difficult to keep up with and is suitable for both beginners and professionals alike.
Another great thing I like about this model is that the protection film is virtually invisible once it has been installed. Not only does this complement the overall aesthetic of my car, but it also excellently protects the factory paint.
On top of that, long term use has tremendously helped to keep my car’s paint newer and younger, as if I’d just gotten it done all over again. Overall, this makes the VViViD a pretty great addition to my arsenal.
Lastly, this model provides excellent protection against paint chips and bug damage. I really like this bit, since it puts my mind at ease and protects my vehicle throughout.
There aren’t that many downsides or de-merits to the VViViD 3M Clear Vinyl Paint Protection Film. However, there are a few things I want you to keep in mind.
This model is not suitable for ski trips and might start to peel if used for that purpose. Secondly, you can’t apply this model to curved surfaces without a heat gun!
Other than that, this model is literally as good as it gets!
I recommend the VViViD 3M Clear Vinyl Paint Protection Film to all types of users out there!
2. Trimbrite BodyGuard Clear Smooth Protection Film
The Trimbrite BodyGuard Clear Smooth Protection Film is my follow-up premium pick for all those who didn’t like my premium pick but wanted something along the same lines!
Easy to apply and use, the Trimbrite is notable for its easy access and self-adhesive nature. This is what I particularly liked about this model since the whole process came almost naturally to me!
Another thing I like about this model is its versatility. I found this model convenient to use for the lower body panels as well, along with the side mirrors and the door edge. However, you’ll need more than one pack if you’re planning to get all those sides!
As far as protection is concerned, the Trimbrite can easily protect the paint surface from road debris and chips. If you’ve got a new car, I’d highly advocate for this model since it will retain the factory paint!
However, before we go further, there are a few things that I feel should be mentioned.
As always, applying the Trimbrite to curved surfaces is a little challenging and might require a heat gun. It’s best to invest in one if you’re looking for optimal performance.
On top of that, I found this model to be a little thick. So you’ll have to be persistent to get the job done right!
If you don’t have any issues with the cons above, then you should definitely give the Trimbrite BodyGuard Clear Smooth Protection Film a shot!
Read Also: Best Lithium Ion Jump Starter Review
3. 3M Scotchgard Clear Paint Protection Bulk Film Roll
Next up, we have the 3M Scotchgard Clear Paint Protection Bulk Film Roll. If you chose this model, here’s what you should look forward to!
The best thing about this model, one that I really like is that it is virtually invisible once it has been properly installed. Along with complementing my vehicle, this effect also gives it that flawless factory paint looks that I’m sure we’re all after!
Another great thing about this model is its easy installation and adhesive backing. However, to make the most of things, I’d still recommend paying close attention to the manual. For extra information, you can always check online resources on YouTube!
Lastly, I found that the 3M Scotchgard Clear Paint Protection Bulk Film Roll packs enough in one model to conveniently cover both sides of my vehicle. If that’s not a great presentation, I don’t know what it is!
As far as downsides are concerned, the only notable thing I’d want you to keep in mind is that this model is thinner than the factory and does not include any instructions.
Plus, you’ll need to pay extra attention to detail during installation to prevent any bubble buildup.
The 3M Scotchgard Clear Paint Protection Bulk Film Roll is a good pick for all types of users out there. Just make sure that you install it well, and you’re good to go!
4. Install Proz Self-Healing Clear Paint Protection Film Kits
The Install Proz Self-Healing Clear Paint Protection Film Kits is the best pick for beginners and people who are starting out. Here’s what you should anticipate!
First and foremost, the main reason for this pick for beginners is because this model comes with a detailed installation video with every kit. Not only do they run you through step by step instructions, but this will also help you immensely down the road on how to work with such films!
Virtually invisible and made from self-healing material, this model is also geared towards long-term use and resilience. If you’re planning to use it to protect factory paint and other surfaces, then you’re in for a treat.
However, there’s a small downside to that. This model doesn’t really have good width coverage. For that reason, I think it would be best if you save this one for smaller jobs.
Before proceeding further, I also want to commentate a little on the installation bit.
I found it quite convenient to use a heat gun when working with the Install Proz Self-Healing Clear Paint Protection Film Kits. This model responds best to rolls and uneven surfaces when it is warm, so I’d advise that you make the most of it.
I recommend the Install Proz Self-Healing Clear Paint Protection Film Kits to beinners and people who are just starting out. If you’re a professional, I’m sure there are better models to consider to meet your needs!
Read Also: Best Brake Caliper Paint Review
5. XPEL Black Universal Door Sill Guard Paint Protection Film Kit
If you’re looking for something simplistic and easy to get the hang of, then the XPEL Black Universal Door Sill Guard Paint Protection Film Kit is my recommendation for you. Here’s why!
First things first, the XPEL is easy to keep up with and doesn’t really require any fancy maneuvers. Just put it on, and you’re good to go!
The XPEL is also reputed for its versatility. If you’re looking for something to use indoor or for purposes other than your vehicle, then this is it. Supplemented with its easy use, this model is best suited for virtually all types of applications there are!
However, before we go any further, there are a few downsides that I feel need to be addressed.
The model comes all crumpled up in a roll, and you’ll need to place it flat overnight under a heavy object for it to be functional. Yes, it can be a pain and hassle, but I highly advise it if you’re planning to make the most of things.
Secondly, I found the paper backing to come off easily but make sure that it doesn’t get dirty. If it does, you’ll lose functionality. On top of that, I also found the XPEL to be a little short to get the bulk of my jobs done.
If you don’t have any issues with the cons above and are looking for something for indoor use, then you should definitely give the XPEL Black Universal Door Sill Guard Paint Protection Film Kit a shot!
6. 3M PAK M3000 Hand-Masker Pre-Assembled Masking Film Kit
If you’re a professional and are looking to add the best masking film kit to your arsenal, then let me introduce you to one of the best that 2020 has to offer!
First things first, the 3M PAK M3000 Hand-Masker Pre-Assembled Masking Film Kit is a complete kit that contains the film blade, roll blue tape, roll MF72 + film, and a hand masker. With all this intact, you’re all set for professional use!
I think it goes without saying that this model is quite versatile and can handle a lot of jobs easily without any issues, owing to its vast assembly and application.
To supplement that, I also found that the components of this kit were quite durable and sturdy, and can easily take a hit. I like this best about this model since it ensures that I don’t have to worry about one part going bad while the others work well.
However, there are a few things I’d warn you about.
Firstly, the cutting of the plastic and tape isn’t easy. It’ll take some getting used to, and a tremendous amount of patience.
Secondly, I found the blade guard design a little off-putting. For people just starting, it can be a little dangerous if left unattended!
I recommend the 3M PAK M3000 Hand-Masker Pre-Assembled Masking Film Kit to all professionals out there!
Read Also: Best Car Scratch Remover
7. Mkbrother Uncut Roll Window Tint Film
The Mkbrother Uncut Roll Window Tint Film is the best model to consider if you’re looking for something smart, elegant, and that can easily get the job done.
Non-metalized and geared towards 50% heat rejection, the Mkbrother Uncut Roll Window Tint Film is a great tint film roll that you can use for your vehicle!
The installation process isn’t that hard to keep up with and requires a little bit of attention to detail. I found it best to refer to online references to help me through the process, especially videos on YouTube.
As far as UV rejection and performance are concerned, the Mkbrother delivered quite well. With almost 99% UV rejection, not only was the interior of my vehicle cool, but the overall frame was also cool to the touch.
The only downside to this model that I found quite bothersome was that it’s a little thin. Normally, this isn’t much of an issue. However, with the Mkbrother, it means that it is more susceptible to wrinkles. This can reduce performance down the road.
Other than that, the Mkbrother Uncut Roll Window Tint Film is a pretty decent model to consider if you’re planning to step up your vehicle’s aesthetics. I say go for it!
If you’re looking for a window tint for your car or something for your house, the Mkbrother Uncut Roll Window Tint Film is a pretty decent pick!
8. JDMBESTBOY 4PCs 3M Scotchguard Protective Guard Film
Next up, we have the JDMBESTBOY 4PCs 3M Scotchguard Protective Guard Film. With a targeted piece at hand, here’s what I like best about.
The JDMBESTBOY comes in 4 pieces, which, of course, can conveniently cover all the four handles in your car. Their dimensions are pretty-spot on as well, and can easily cover the bulk of vehicles out there.
As far as installation is concerned, then I found this model pretty easy to keep up with. Due to its self-adhesive nature, all I had to do was just stick and peel. However, make sure that the surface is thoroughly cleaned before sticking it!
On top of this, another thing that I really liked about the JDMBESTBOY is that it is water-resistant. This makes it so much easier to clean the frame using just water. Plus, it’s also easy to remove and won’t leave behind any residues.
The performance of this model is pretty fit and geared towards active users, which is why I think everyone should give it a go. However, there are a few things you’ll need to keep in mind before making the final call.
The outline of the model is pretty obvious, which means they’ll be visible when they’re applied. Plus, even though the model is universal, size might be an issue from time to time if you’ve got customized handles!
I recommend the JDMBESTBOY 4PCs 3M Scotchguard Protective Guard Film to every user who is looking for a reliable handle protection film!
Read Also: Best Jump Starter With Air Compressor Review
9. VViViD 3M Clear Paint Protection Vinyl Film
The VViViD 3M Clear Paint Protection Vinyl Film is a good model to consider if you’re looking for something small and easy to work with.
I found this model the most helpful when I want to take care of small jobs. This is primarily due to the dimensions of this model. Since it doesn’t really have too much span, it’s best for tackling jobs that are small.
As far as functionality is concerned, the VViViD was great at reducing paint chips and scratches on the front bonnet. With an invisible aesthetic to it, this model conveniently protected my vehicle from any type of damage on the road.
Another great thing about this model is that it comes with its very own toolkit, which includes two anti-scratch VViViD felt decals and a yellow detailer squeegee.
Word of the wise, though, I’d recommend keeping two things in mind before settling for this model.
Firstly, the instructions aren’t as good as you’d want. Secondly, installation is a little hard, especially because of the bubble formation. So you’ll have to be super careful to get the job done right!
If you’re willing to settle for a challenging installation, then the VViViD 3M Clear Paint Protection Vinyl Film is a good pick. If not, then there are definitely better models to choose from!
10. PrintsnPlots – 3M Pro Series Paint Protection Film
Last but not least, I present to you the PrintsnPlots – 3M Pro Series Paint Protection Film.
The best thing I like about this model is its easy installation. Simple to use and get the hang of, this bulk piece model is best suited for users who are looking for a simple solution to their paint protection need.
On top of that, I also found this model quite effective in keeping the front bonnet of my vehicle safe. Plus, it also helped that the frame was almost invisible once it was installed, so it didn’t interfere with the aesthetics of my vehicle.
Before going forward, I just want to mention that there’s one thing you need to pay attention to. This model is in a square shop, as opposed to the traditional film. So you’ll need to carefully span out where exactly you intend to use it.
Surprisingly, the PrintsnPlots doesn’t really have any downsides to it that I felt worth mentioning. By choosing this model, I assure you you’re in for a comfortable ride.
Just make sure you pay good attention to the installation process, and you’re good to go!
I recommend the PrintsnPlots – 3M Pro Series Paint Protection Film to all types of users out there who are looking for square bulk pieces!
Read Also: Best Portable Car Jump Starter Review
Things to consider when buying paint protection film
If you’re setting out to get the best paint protection film for your vehicle, then there are a few things that you’ll need to be wary of. Here’s my premium list of things to watch out for!
The first thing I want you to keep in mind is the dimensions of the model.
Films with bigger width are quicker to apply since they cover more space. However, they’re not suitable for small jobs. Likewise, smaller dimension models are best for tight spaces.
Make sure you have a clear understanding of what you’re about to tackle, and then work from there!
Ease of use
If you’re a beginner, then it’s a good idea to choose a model that is DIY and can be done at home without any professional help.
Most models come with instruction manuals. Make sure to check that it’s included to make the most of things!
Lastly, make sure that you check how many packs or rolls the model you chose has.
This needs to be done in accordance with the type of job you have in mind, and how much coating/film you require.
Read Also: Ways to Protect Your Car Paint
Frequently Asked Questions (FAQs)
I’ve compiled the most commonly asked questions so that you can get a better grip on paint coat. Here goes!
Is paint protection film any good?
Yes, a paint protection film is arguably the simplest and most effective way of protecting the front of your vehicle. However, note that it isn’t there for aesthetic purposes, so it won’t do your vehicle any good in that department.
How long does a 3M paint protection film last?
A good 3M paint protection film should last anywhere between 5 to 10 years depending on your type of usage. For most users, 8 years or above are generally expected.
Should you get paint protection for a new car?
Yes, you should. Not only will this ensure that your vehicle is kept safe at all times, it also means that you’re saving yourself a tedious task later down the road; something you’ll be thankful for when the time comes.
How thick is 3M paint protection film?
A 3M paint protection film is 0.0008″ thick.
Can a paint protection film be removed?
Yes, you can remove paint protection film. All you’ll need for the job is a microfiber towel and spray some adhesive remover on the desired surface. While at it, rub the area gently repeatedly. Eventually, the film will come off.
Does paint protection film damage paint?
No. on the contrary, it will protection the paint from all type of damage with all that it’s got. This is because of its high impact resistance, which will keep the coat safe from chips and scratches.
Does a car wrap ruin paint?
No, a car wrap will not ruin paint. If anything, it will protect it better. If you have a new car, then it’s a good idea to wrap it soon since it will protect the factory paint.
Will ceramic coating prevent rock ships?
No. ceramic coating is very effective against minor scratches and similar stuff. However, when it comes to rock ships, this type of coating doesn’t really offer that much protection. This is because of the force and dynamics involved of the object.
Which is better: paint protection film or ceramic coating?
Generally speaking, a paint protection film is the better option out of the two. Since it is thicker in appearance, a paint protection film will provide better protection against rock ships and scratches. Ceramic coating isn’t really effective against the former here.
Can I remove a 3M paint protection coat myself?
Yes, you can. However, I highly recommend that you get this job done professionally. This is because complete removal requires the utmost attention to detail, and minor mishaps can lead to undesired results.
A good paint protection film will keep your vehicle safe and your conscious clear, so never settle for less than what your vehicle deserves. If you own any of the models mentioned above and have feedback, or have any general recommendation or suggestion, do share them in the comment section below!