Responsible for air supply and acceleration, the throttle body is the underrated part of your vehicle that makes it go fast. However, it also gets beat around quite a lot in the form of carbon debris.
Naturally, this is unavoidable since combustion engines have to produce carbon. There’s no way around it. But luckily for us, we have just the right tools to deal with this mess and get the most out of the throttle: a good valve cleaner!
- Why best engine valve cleaner needed
- Comparison table of Top 10 Engine Valve Cleaner
- Our 10 Picks of best engine valve cleaner
- 1.CRC 05319 GDI IVD Intake Valve & Turbo Cleaner
- 2. Liqui Moly 2001 Valve Clean
- 3. S100 12005L Total Cycle Cleaner Bottle
- 4. STP Fuel System Cleaner and Stabilizer
- 5. CRC 05103 QD Electronic Cleaner
- 6. Gumout 800002230 Carb and Choke Cleaner
- 7. WD-40 Specialist Carb/Throttle Cleaner
- 8. ATP AT-100 Intake Blast Complete Intake System Cleaner
- 9. CRC 05078 Throttle Body and Air-Intake Cleaner
- 10. Berryman Intake Valve and Combustion Chamber Cleaner
- Things to consider when buying best engine valve cleaner
- Frequently Asked Questions (FAQs)
- Final Thoughts
Why best engine valve cleaner needed
A good engine valve cleaner can have many benefits, but the best one guarantees results. With just slight inspection, you can easily boost your vehicle’s HP, mileage, reduce idling, and get the best performance that you truly deserve.
To help you settle for the best, I’ve taken the liberty of compiling the most sought after products currently in the market. Here’s a list to get you started!
Comparison table of Top 10 Engine Valve Cleaner
Our 10 Picks of best engine valve cleaner
I have now briefly go over all the models that have been featured in the list above. Furthermore, I’ve also mentioned a few pros and cons that serve as an apt summary of what I think of the model, and I hope that helps you out as well.
Without further ado, here are the top 10 picks of the best engine valve cleaners!
1.CRC 05319 GDI IVD Intake Valve & Turbo Cleaner
Starting off with my premium recommendation, I’ve always been a huge fan of the CRC 05319 GDI IVD Intake Valve & Turbo Cleaner. One of the greatest out there, here’s what I think sets it apart!
The first thing that deserves applaud, and a highlight, is that this model has shown and proven to systematically and effectively clean intake valves on GDI engines. This is a feat that can be alone credit to this model, which is what I like best.
Another great thing is the fact that it can be easily installed through the intake system, so on the overall sphere of things, I think the CRC 05319 GDI IVD Intake Valve & Turbo Cleaner is quite easy to handle and suitable for all users out there.
On top of that, I also found it very convenient that cleaner had its best effect within 1 hour. If you’re in a hurry, this, of course, is the best way to go about it.
However, there are a few downsides to the whole thing.
When working with the CRC, make sure that you spray with caution because too much spraying can lead to undesirable results, such as accumulation on the intake.
Furthermore, I found this model better suited for routine maintenance as opposed to using it for a pre-existing condition or problem.
I recommend the CRC 05319 GDI IVD Intake Valve & Turbo Cleaner to all users out there looking for something reliable for frequent use!
2. Liqui Moly 2001 Valve Clean
Next, up, I present to you the Liqui Moly 2001 Valve Clean. The Liqui Moly 2001 Valve Clean is my follow-up recommendation for serious users who are looking for something with a simpler design. Here’s what you should anticipate!
What sets this model apart from the rest is that even though it might not show it, I found that using the Liqui Moly had a great impact on my vehicle performance. For me, I keep it simple. If the mileage goes up, so does my trust.
Another great thing about this model that I endorse is that it has a lower pollutant emission. Effectively environmentally friendly, I think that’s a great initiative to get behind, and I’d recommend you do as well.
The last thing that deserves a highlight is that the Liqui Moly 2001 Valve Clean can effectively protect your vehicle’s interior against any sort of corrosion or icing. I like this bit as well since it puts me at ease that this valve cleaning is doing its job well.
However, there are a few things to account for beforehand.
The box is a little fragile than anticipated and might not hold up to rough use. So keep that in mind at all times. Another thing to make realize that it won’t make a difference right off the bat and will take time.
Easy to use and handle, the Liqui Moly 2001 Valve Clean is a great choice for all users. Go for it!
Read Also: Top Rated 10 Anti Fog Spray Review
3. S100 12005L Total Cycle Cleaner Bottle
With a larger capacity and simplistic design, the S100 12005L Total Cycle Cleaner Bottle is an excellent choice if you want something in bulk for your garage.
I’d also like to add this model is specifically for motorcycles, so if you’ve got a four-wheeled vehicle, best to keep on reading. On the contrary, let’s get into it!
Non-acidic with a meticulous pH level that can effectively deal with corrosion stains and other substances, the S100 12005L Total Cycle Cleaner Bottle is a biodegradable option that is both safe for your motorcycle and the environment.
Overall, I think this is what sets it truly apart since it’s a niche design but also factors in overall effect on the surrounding. I like this model, particularly due to this reason.
Another great thing that I like is that this model is great for all surfaces. Be it plastic, rubber, or chrome, the S100 12005L Total Cycle Cleaner Bottle will deal with it gently and with care.
On the opposite spectrum, however, make sure you watch out for the following!
If you’re looking for a shine after application, you’ll need a little bit more than the traditional spray and wash. Plus, this model isn’t that long-lasting since you need to use a considerable amount to get the effect needed.
I recommend the S100 12005L Total Cycle Cleaner Bottle to all motorcycle enthusiasts who are looking for something reliable!
4. STP Fuel System Cleaner and Stabilizer
Featuring a design that is a little more intimidating than it should be, the STP Fuel System Cleaner and Stabilizer is a great choice once you get the hang of it. Here’s why it’s a good choice for your car!
First and foremost, the STP Fuel System Cleaner and Stabilizer has a direct influence over the performance of your vehicle and of course, that’s a win for you. Plus, I think that’s what really sets this model apart from the rest.
Another thing I like about the STP is that along with increased mileage and horsepower; the liquid mixture is designed specifically to deal with any harmful carbon deposits.
Frankly, I rarely have to worry about anything left behind since this model deals with things so precisely and aptly. It’s a great overall choice, and I can back this up. The golden kicker? It also reduces rough idle!
However, before making the final call, make sure that you acknowledge the bad side as well.
The first thing is that this model isn’t optimal for beginners or if you’re just starting out, especially since it’s a little hard to get used to an execute properly. The second thing would be that I didn’t find the manual that good, so best be prepared on that end as well!
If you’re a professional looking for something reliable and self-operational, then this is a great pick. But if you’re looking for something for occasional use, keep reading!
5. CRC 05103 QD Electronic Cleaner
Simple, modest, and effective, the CRC 05103 QD Electronic Cleaner is a brand that your local mechanic would vouch for. Here’s my take on the thing!
The best thing about this model is its quick-drying formula. I think that’s what really gives it the edge over other models, the fact that you don’t really have to wait for the whole thing out.
Furthermore, the fact that the CRC 05103 QD Electronic Cleaner is safe to use on plastic without leaving any residue has made this model a favorite among professionals and hobbyists alike and is something that I endorse as well.
Another feature that I think that you might enjoy is that the CRC can effectively help prevent any type of contact failure. With this model in check, that is something you can almost say goodbye to.
Nonetheless, even with all the good stuff going on for it, there are a few minute details that I think might influence your decision, and rightly so.
The first is that the CRC 05103 QD Electronic Cleaner has a very bad odor to it. If you’re working in closed spaces, better watch out.
Additionally, it’s not that effective against grease. So make sure to keep that in mind before setting out for your task!
Old-school and effective, the CRC 05103 QD Electronic Cleaner is a good choice if you want something simple and effective.
Read Also: Top rated 10 Tonneau Cover Cleaner Review
6. Gumout 800002230 Carb and Choke Cleaner
Completely different from the model above, I now have the brand new Gumout 800002230 Carb and Choke Cleaner. Easy to use and handle, here’s what I like best about it!
The model is fairly versatile when it comes to vehicle maintenance. I found out the easy way that the Gumout 800002230 Carb and Choke Cleaner can help me overcome stalling, high exhaust emissions, and a whole lot of other problems with ease.
Of course, this is something I like since it means that I’ve landed on the proverbial holy grail. One cleaner to help them all? I’ll take it for sure!
Another great thing that I liked as well that this model could effectively deal with dirt from clogged carburetors and valves. However, word of advice; don’t expect miracles within the first application. Take time with the proper cleaning arrangements.
Lastly, I found that the Gumout 800002230 Carb and Choke Cleaner can clean unpainted metal parts easily, and the mixture dries quickly as well. That’s a win-win for both of us.
However, there are a few minor downsides.
The valve stem is little brittle, so you’ll need to keep it safe from damage. Plus, the overall system is a little fragile, so best handle with care!
If you don’t mind gentle handling and want the best results, the Gumout 800002230 Carb and Choke Cleaner is definitely it!
7. WD-40 Specialist Carb/Throttle Cleaner
Simple, effective, and arguably one of the best out there, the WD-40 Specialist Carb/Throttle Cleaner is a must-have for all car enthusiasts. Here’s why I think you should give it a shot!
The best thing about this model is its dual-action cleaning formula, which is a revolutionary mixture that literally makes all the difference. Here are the key points!
With the perfect pH level, the WD-40 first breaks up and disintegrates tough and caked carbon, and then holds on to them. After that, just blast a spray of water, and you’re good to go!
Another interesting thing about this model is its overall versatility. I found that the WD-40 Specialist Carb/Throttle Cleaner is a great choice to have around the garage and can be used on a multitude of other things as well, such as the lawnmower, tractors, and weed trimmers.
Overall, this makes it a great prospect.
Lastly, the number one benefit that I faced from this model that you would like as well is that it made my vehicle’s engine start-up faster and run smoothly. And frankly, that’s all it took for me to become a believer.
Just make sure to pay attention to how much you use it because it runs out quite fast. Plus, it has a weird smell to it as well.
The WD-40 Specialist Carb/Throttle Cleaner is a great choice for all users out there, and I would recommend definitely going for it!
8. ATP AT-100 Intake Blast Complete Intake System Cleaner
As usual, I’m bound to feature one model on this list that holds eye-candy value for me. With a stylish package that catches the eye, the ATP AT-100 Intake Blast Complete Intake System Cleaner is a blend of performance and aesthetics.
If you chose this model, here’s what you should expect.
Easy to use with aerosol application, this model is a simple one that can be easily handled and looked after by novice users. To add versatility to this end, the ATP also comes with multi-adaptor fittings and includes a vacuum hose.
I think what truly sets it apart from other models on this list is that it has no effect whatsoever on the O2 sensor or the catalytic converter, very much like the model above. As far as I’m concerned, this feature is quite exclusive and I don’t mind having it on board.
As far as overall functionality is concerned, the ATP delivered quite well and helped dissolve carbon and oil residue, which subsequently improved my vehicle’s performance.
On that note, I didn’t find any downsides or de-merits to its performance, so there isn’t anything particular that you need to watch out for. Just make sure you use it properly, and you’re good to go!
If you’re looking for something stylish, I would highly recommend that you go with the ATP AT-100 Intake Blast Complete Intake System Cleaner!
Read Also: Top rated Carburetor Review & Top 10 Picks
9. CRC 05078 Throttle Body and Air-Intake Cleaner
The last model by CRC on this list, I think you might have figured that I have a history with them. Fair to say, CRC produces reliable and reputable products that can help in the long run. CRC 05078 Throttle Body and Air-Intake Cleaner are definitely one of them!
The best thing about this model is that it effectively tackles and eliminates hesitation and rough idle. This, in extension, allows for better vehicle performance and makes the whole thing worth it in the end.
As far as application and use is concerned, I found the CRC 05078 Throttle Body and Air-Intake Cleaner very easy to get the hang of. I would, however, advise that you use a manual initially if you’re just starting out.
Lastly, I’d give the CRC a thumbs up because it also easily removed harmful deposits. My priority is to keep my air-intake clean, and that’s literally what it gave me. So frankly, I’m happy with what I got.
However, make sure that you keep the following in mind before making the final call for yourself.
When cleaning, the mixture might still require a little bit of rubbing. Don’t expect it to just eat away at the gunk, and you’re done.
Plus, the smell is not going to lie, kind of horrid.
The CRC 05078 Throttle Body and Air-Intake Cleaner is a great choice if you can get past the hurdle of scent. Just make sure to ventilate the place properly!
10. Berryman Intake Valve and Combustion Chamber Cleaner
Last but not least, we have the Berryman Intake Valve and Combustion Chamber Cleaner. Reliable and worth the consideration, here’s why I gave it a shot, and why you should do it as well!
The best thing about this model was that it could easily handle and clean all types of intake valves. This, of course, includes those found in PFI, GDI, and TBI engines. So if anything, it’s versatility is in absolute check.
For that reason, I think this is a great cleaner to consider if you’re a professional and want something for professional use. This 1-for-all formula is a good one to have nearby if you don’t want something specific.
As far as performance is concerned, I can definitely vouch for this model as well. With the ability to easily dissolve carbon, I found this model quite helpful and easy to use.
However, it has one major flaw that sort of makes it a bad choice for a lot of people out there.
The first is that it isn’t cost-effective. This model runs out pretty quickly, and before you know it, you’ll be looking for a replacement. Nonetheless, you can still keep it as a backup.
Other than that, the Berryman Intake Valve and Combustion Chamber Cleaner is genuinely a great choice, and I would highly recommend it for the bulk of users out there!
If you’re a professional looking for something versatile or a novice looking to get the job done, this is it!
Things to consider when buying best engine valve cleaner
When setting out to pick the best engine valve cleaner for your vehicle, there are a handful of things and features that require meticulous attention to detail. Over here, I’ll take you through them.
For best measure, of course, I would recommend you use all of these in conjunction. Here are the top things to consider!
Make sure to note the capacity of the model you’re considering and consult the manufacturer how often you’ll need to use it.
This will give you a rough idea of the cost effectiveness of the model, and will also help you get a general idea how long the bottle might last.
Choose a model that has a spray type that you’re comfortable with.
If you like nozzle based drip or aerosol, it’s entirely your call. However, just make sure that the mechanism is something you can deal with eyes closed.
A good valve cleaner should be applicable on a wide variety of surfaces.
Another benefit of this neat feature is that it will allow for versatility and make it easier to apply the mixture to other surfaces as well, such as equipment in the garage or lawn related stuff!
Finally, always try to get something that is biodegradable and environmentally friendly.
Not only does this reduce the overall health hazards, it’s also one step towards being more sustainable for the future!
Frequently Asked Questions (FAQs)
Here is a brief list of the questions that users normally ask about engine valve cleaners. I hope they help you out as well!
• How do I get rid of carbon build up in my engine?
The best way to go about removing carbon build up on the engine is by using the appropriate solvent for that surface and then using fine steel wool to rub it out. furthermore, you can also choose to soak the part in soap water for the stubborn stains to soften out.
• How do you tell if you have carbon build up in your engine?
The simplest giveaways for carbon buildup in your vehicle might be engine vibration or shaking more than usual, surging at stops or vehicular jerking, and cold start misfires.
• Why does carbon build up in the engine?
The simple act of combustion, which is common to all vehicles, produces carbon which naturally settles in its immediate vicinity which causes carbon buildup.
• Can carbon clean damage your engine?
Too much of anything can be too bad. If done excessively, there’s a good chance that the solvent can damage the layer beneath and cause underlying issues which will compound with time.
• Are engine cleaners worth it?
Yes. engine cleaners are absolutely worth it and great to have around, especially if you drive around often. They’re an easy way to get better mileage and vehicle performance.
• Is it okay to spray carb cleaner in a spark plug hole?
Yes. It is okay, and the process is safe. However, there are a few things that you should consider heavily before making this call. For best measure, I would highly suggest consulting a mechanic first.
• How often should I carbon clean your engine?
This is a subjective take on things. Generally, do it more if you drive around more frequently. Whereas if you don’t use your vehicle as much as you’d like it, this is something that can be delayed without any major issues arising.
• How do you remove carbon deposits from valves?
Using engine valve cleaners is a great way to remove carbon deposit from valves. Made with a concentrated formula, they eliminate and disintegrate the whole layer and help keep the valve clean for further use.
• Can I remove carbon deposits myself?
Yes, you can most certainly do it online. Just look up a suitable manual for the solvent you’re using and you’re good to go!
• What is the most important thing about carbon cleaning?
Make sure that you’re always in a well-ventilated region because the solvents can often have a bad odor that can occasionally be quite toxic. So it’s best to check this off your list first before moving forward!
Choosing the right type of cleaner for your vehicle is of utmost importance, since that is one sole factor that can help your vehicle out in the long run.
If you have experience with any of the models mentioned above and have feedback, or have any other general recommendations or suggestions, do share them in the comment section below!